![]() Pins 11 and 14 are the outputs from which the drive signals are to be taken. It is common practice to tie VC to VCC when VCC is below 20V. Similarly when the SG3525 outputs are fed to another driver or IGBT, VC must be selected accordingly, keeping in mind the required voltage for the device being fed or driven. So when driving Power MOSFETs, VC should be within the range 9V to 18V (as most Power MOSFETs require minimum 8V to be fully on and have a maximum VGS breakdown voltage of 20V).Ĭare must be taken to ensure that the maximum VGS breakdown voltage of the MOSFET is not crossed. The output drive voltage will be one transistor voltage drop below VC. VC must lie within the range 4.5V to 35V. Sg3525 Ir2110 Smps Rarest Drivers Or Gate.Sg3525 Ir2110 Smps Rarest Driver Or IGBT.
0 Comments
Leave a Reply. |